R - STANDBYG POWER ONINPUT MENU ENTER+VOLMENU Screen ON / OFFEach time the MENU button is pressed, the menu screenwill switch. (see page 16)INPUT button(INPUT1, INPUT2, INPUT3 and PC selection)(see page 13)Power IndicatorThe Power Indicator will light.• Power-OFF .... Indicator not illuminated (The unitwill still consume some poweras long as the power cord is stillinserted into the wall outlet.)• Standby.......... Red• Power-ON ...... Green• DPMS .............Orange (With PC input signaland during operation of PC’sscreensaver.)Main Power On / Off SwitchVolume AdjustmentVolume Up “+” Down “–”When the menu screen is displayed :“+” : press to move the cursor up“–” : press to move the cursor down(see page 16)Enter / Aspect button(see page 16, 18)Remote control sensor14Basic ControlsSURROUND buttonThe surround setting switches on and off each timethe SURROUND button is pressed.The benefits of surround sound are enormous. Youcan be completely enveloped in sound; just as ifyou were at a concert hall or cinema.Note:The surround settings are memorized separatelyfor each Sound Mode (Normal, Dynamic, Clear).On OffOnSurroundN button (see page 19, 20, 23, 24, 25)POS. / SIZE button (see page 19)PICTURE button (see page 23)INPUT button(INPUT1, INPUT2, INPUT3 and PC selection)Press to select INPUT1, INPUT2, INPUT3 and PCinput SLOTS sequentially. (see page 13)Sound mute On / Off (see page 25)Numeric buttons (see page 35, 41)ASPECT buttonPress to adjust the aspect. (see page 18)MULTI Window buttons (see page 21)Normal Viewing Picture SetupSound Pos. /Size