27TH-65PF20W / TH-65PF20T9.18. Removal of C3-Board1. Remove 6 screws and then remove the Hanger Assy Land the Stand Cover L.2. Disconnect the connectors (C35).3. Remove the flexible cables from the connectors (C31,C33, C36).4. Remove 10 screws ( ) and then remove the flexiblecables from the connectors (CB11, CB12, CB13, CB14,CB15).5. Remove 6 screws ( ) and then remove C3-Board.9.19. Removal of S1-Board1. Remove 2 screws (B) and then remove the S1-BoardBlock.2. Disconnect the connector (S35).3. Remove 1 screw (C) and then remove S1-Board.4. Remove the Switch Attachment from S1-Board.9.20. Removal of Front Glass, V1,V2-Board and Cabinet Assy1. Remove the S1-Board Block.(Refer to Removal of S1-Board)2. Disconnect the connectors (A11, A22).3. Remove 12 screws ( ).4. Pull the bottom of the Plasma Display Panel forward(arrow1).5. Slide the Plasma Display Panel and then remove thePlasma Display Panel (arrow2).9.20.1. Removal of Front Glass1. Remove 28 screws ( ) and then remove the Fixed Angle(left, right, upper, bottom).2. Remove the Front Glass.