28TH-65PF20UNote: when fixing Fixed Angle (upper, bottom, left,right)• Firstly (1-2-3) in order.Note: when Front Glass is exchanged• Paste the Front Glass Sponges in order along eachFixed Angles left and right, upper and bottom.Note• The sponges are parts which cannot be recycled. Pleaseuse the new article when you exchange the Front Glass.9.20.2. Removal of V1-Board and V2-Board1. Remove 20 screws ( ) and then remove the Fixed Angle(left, right, upper, bottom).2. (Refer to remove of Front Glass).Remove the Front Glass.3. Remove 1 screw (D).4. Disconnect the connector (V11) and then remove V1-Board.5. Remove 3 hooks and then remove the Power Button andPower Button Spring.6. Disconnect the connector (V22) and then remove V2-Board.7. Remove 2 hooks and then remove the 5 Key Button fromV2-Board.9.20.3. Removal of Cabinet Assy1. Remove the Front Glass.(Refer to Removal of Front Glass)2. Remove V1-Board and V2-Board.(Refer to Removal of V1-Board and V2-Board)3. Remove the LED Panel and Remote Sensor Panel.9.21. Removal of Plasma DisplayPanelThe C1,C2,C3 Boards are connected with the plasma dis-play panel for the repair.1. Disconnect the Fan Relay Connectors.2. Remove 8 screws and then remove the Fan.3. Disconnect the connectors (DS13, P9).4. Remove the flexible cable from the connector (DS1).