Panasonic TH-65PB1E Network Operation Manual

Also see for TH-42PF50W: Operating instructions display operations

Contents

Panasonic TH-65PB1E Network Operation Manual Manual pdf 27 page image

27PJLink™ ProtocolThe network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from yourcomputer using PJLink™ protocol.• Display setup• Display status querySupported commandsCommands to control the unit with PJLink™ protocol are shown in the table below.PJLink™ security authenticationWhen using PJLink with security authorization, either of the password set for administrator privileges and thepassword set for user privileges with Web browser control can be used as the password for PJLink (See page 19).When using PJLink without security authorization, set use without the password for administrator privileges and thepassword for user privileges of Web browser control.• PJLink™ is a pending trademark in Japan, the United States, and other countries or areas.Command Control RemarkPOWR Power control Parameter0 = Standby 1 = Power “On”POWR? Power status query Parameter0 = Standby 1 = Power “On”INPT Input switch ParameterSee the parameter for command INST?INPT? Input switch queryAVMT Shutter control Parameter10 = Picture On (picture mute deactivated), 11 = Picture Off (picture onmute)20 = Audio On (audio mute deactivated), 21 = Audio Off (audio on mute)30 = Shutter mode Off (picture and audio mute deactivated)31 = Shutter mode On (picture and audio on mute)AVMT? Shutter control query Parameter11 = Picture Off (picture on mute)21 = Audio Off (audio on mute)30 = Shutter mode Off (picture and audio mute deactivated)31 = Shutter mode On (picture and audio on mute)ERST? Error status query ParameterFirst byte: Means fan error. 0 or 2.Second byte: 0Third byte: 0Fourth byte: 0Fifth byte: 0Sixth byte: Means other error. 0 or 2.Meaning of the 0 – 2 settings:0 = Error is not detected, 2 = ErrorLAMP? Lamp status query Not supportedINST? Input switch list query ParameterNumbers 11 to 13 are depending on the slot installation condition11: PC IN input (PC)When a single input terminal boardis attached11: SLOT input (SLOT INPUT)12: PC IN input (PC)21: VIDEO input (VIDEO)31: HDMI input (HDMI)51: Network input (NETWORK)When a dual input terminal boardis attached11: SLOT input (SLOT INPUT A)12: SLOT input (SLOT INPUT B)13: PC IN input (PC)22: COMPONENT/RGB IN input(COMPONENT)32: DVI-D IN input (DVI)NAME? Display name query The name set for [Name Change] in [Network Setup] is returned.INF1? Manufacturer name query Returns “Panasonic”INF2? Model name query Returns “TH-65PB1”INFO? Other information query Returns version numberCLSS? Class information query Returns “1”

/ 28

Related manuals for Panasonic TH-42PF50W