Panasonic TH-65PB1E Network Operation Manual

Also see for TH-42PF50W: Operating instructions display operations

Contents

Panasonic TH-65PB1E Network Operation Manual Manual pdf 13 page image

13Network SetupPress ▼ to go to the next item.4 In addition, further perform the following setting depending on [Authentication] and [Encryption] settings.************************Key 2Key 3Key 4Key 11Default Key********When setting [Open] or [Shared] as authentication and setting [WEP] as the encryption●method:Default Key : Set 1 – 4 numerals for the default key.Key1 – 4 : Set a WEP key to the key number selected with [Default Key].Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input fivealphanumerics (or a 10-digit string for the hexadecimal format) for the 128-bit key, input13 alphanumerics (or a 26-digit string for the hexadecimal format).When using [WPA-PSK] or [WPA2-PSK] :● Set a key.Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.When the authentication method is [WPA-EAP/WPA2-EAP], [WPA-EAP], [WPA2-EAP]:●Set [EAP], [User name], and [Password].EAP: Select the EAP setup in the RADIUS server. Types of EAP that can be selected are asfollows.PEAP (MS-CHAPv2), PEAP (GTC), EAP-TTLS (MD5),EAP-TTLS (MS-CHAPv2), EAP-FAST(MS-CHAPv2), EAP-FAST(GTC), EAP-TLS ¼User name: Input a user name used for authentication (excluding spaces)(maximum 64 characters).Password: Input a password used for authentication (maximum 64 characters).: When [EAP-TLS] is selected as EAP, it is required to setup “USER NAME”, “PASSWORD”, “DIGITAL¼CERTIFICATE”, and “CA CERTIFICATE” with the WEB browser. (See page 24 – 25)If you are unable to connect to the wireless LAN through the access point, contact the manufacturer of• the access point.When using EAP, the display needs to be set according to the setting of the RADIUS server. Check with• the network administrator for the setting of the RADIUS server.When using an EAP together with an access point with invalid SSID broadcast, select WAP-EAP or• WAP2-EAP for the authentication method even if the authentication method of the access point is WPA-EAP/WPA2-EAP.Select [5 Save] and press button.Save the current network settings.Default wireless LAN settings■ The following settings are set before the Display leaves the factory.SSID Panasonic Display Mode AD HOCDHCP Off Authentication OpenIP address 192.168.11.100 Encryption NoneSubnet mask 255.255.255.0 Channel 11Gateway 192.168.11.1