Panasonic TH-60PF50E Operating Instructions Manual

Also see for TH-60PF50E: Operating instructions

Panasonic TH-60PF50E Operating Instructions Manual Manual pdf 12 page image

INPUT MENU ENTER/+/VOL-/12EnglishPower On / OffConnecting the AC cord plug to the Plasma Display.Press the button on the remote control to turn the Plasma Display off.Power Indicator: Red (standby)Press the button on the remote control to turn the Plasma Display on.Power Indicator: GreenTurn the power to the Plasma Display off by pressing the switch on theunit, when the Plasma Display is on or in standby mode.Note:During operation of the power management function, the power indicator turnsorange in the power off state.Connecting the plug to the Wall OutletNotes:• Main plug types vary between countries. The powerplug shown at right may, therefore, not be the typetted to your set.• When disconnecting the AC cord, be absolutelysure to disconnect the AC cord plug at the socketoutlet rst.Press the Power switch on the Plasma Display toturn the set on: Power-On.Power Indicator: Green[Starting up the network]It takes some time for the network to start up justafter the power is turned on.During that time, “Network Setup” in the “Setup” menuis grayed out and cannot be set.Power IndicatorRemote Control Sensor