English8Installing the wall-hanging bracket■ When using the wall-hanging bracketChoosing to wall mount the TV shall be done at theowner’s risk. Always use a qualified installer to performa TV wall bracket installation. Incorrect fitting may causeequipment to fall, resulting in injury and product damage.Any such damage will void your warranty.● Holes for wall-hanging bracket installationRear of the TVab49-inch modela: 200 mmb: 200 mm55-inch modela: 300 mmb: 300 mm(View from the side)Depth of screwminimum: 9 mmmaximum: 21 mmType of screw: M6Screw for fixing the TV onto thewall-hanging bracket (not supplied withthe TV)Warning● When optional accessories such as wall brackets, etc.are used, always read and follow the manufacturesinstallation and usage instructions.● Do not mount the unit directly below ceiling lights(such as spotlights or halogen lights) which typicallygive off high heat. Doing so may warp or damageplastic cabinet parts.● When installing wall brackets you must ensure thewall bracket is not electrically grounded to metal wallstuds. Always ensure that there are no electricalcables, pipes, etc. in the wall before you begin thewall bracket installation.● To prevent fall and injury, remove the TV from its fixedwall position when it is no longer in use.Preventing the TV from falling overIt is recommended to secure the pedestal to a furnitureas shown to prevent the TV from falling over.● This information is designed to reduce the risk ofinjuries caused by the TV falling over. However, nomeasure can guarantee protection in all cases.Attaching the fall-prevention parts1 Remove the screw.Screw2 Attach the fall-prevention parts.BandWoodscrewScrew