- 129 -= Note =● If you cannot operate the equipment, check the settings and theequipment.Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link● Some operations may not be available depending on the equipment. Inthis case, use the remote control of the connected equipment.● For details of the operations for the connected equipment, read themanual of the equipment.Speaker SelectionYou can control the theatre speaker with this TV’s remote control by pointingat the TV’s signal receiver.1. Display APPS List with APPS.2. Select VIERA Link with / / / and press OK to access.3. Select Speaker Selection with / and press OK to access.4. Select Home Cinema / TV with / and press OK to set.Home Cinema:The sound is delivered from theatre speakers. Player theatre, Blu-ray Disc theatre or Amplifier will be automatically turned on if it is inStandby mode.● The sound of TV speakers is mute. When the equipment is turnedoff, TV speakers will be activated.● You can use Volume Up / Down and MUTE.TV:TV speakers are active.■ Multi-channel soundIf you want to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch) viaan Amplifier, connect it with an HDMI cable and Optical digital audio cable,and then select Home Cinema. If your Amplifier has the “HDAVI Control 5”function, you only need to connect it with an HDMI cable to the TV’s HDMI2terminal.To enjoy multi-channel sound from DIGA Recorder, connect an HDMI cablefrom the DIGA Recorder to the Amplifier.