16 EnglishVideo equipment connectionIR INSERIALOUTIR OUTSERIALING/Y/VIDEOB/PB/CBR/PR /CRAUDIO1 IN AUDIO2 INCOMPONENT/RGB/VIDEO IN DVI-D IN DVI-D OUTAUDIO OUT USBPC IN AV IN1 2 3 4 5 6 7 8Micro-USBUSBOpenPortPLATFORMLAN111213149101 PC IN: PC Input TerminalConnect to video terminal of PC,video equipment with “YP BPR /YC BC R ” or “RGB” output.2 AUDIO1 IN: Audio input terminal sharedwith DVI-D IN and PC IN3 COMPONENT /RGB /VIDEO IN:COMPONENT / RGB VideoInput Terminal (R/PR /CR, B/PB /C B, G/Y)Connect to video equipmentwith “YP BPR / YCBC R ” or “RGB”output.Composite Video InputTerminal (VIDEO)Connect to video equipment withComposite signal output.4 AUDIO2 IN: Audio Input Terminal sharedwith COMPONENT/RGB IN andVIDEO IN5 AUDIO OUT: Analogue Audio OutputTerminalConnect to audio equipment withanalogue audio input terminal.6 AV IN(HDMI 1,HDMI 2):HDMI Input TerminalConnect to video equipment suchas VCR or DVD player, etc.7 DVI-D IN,DVI-D OUT:DVI-D Input / Output TerminalConnect to video equipmentwith DVI-D output. Also, whendisplaying the picture by daisychaining multiple displays,connect to the other display(DVI-D OUT).The DVI-D output function isenabled only when the picture isdisplayed via DVI-D IN.8 USB: USB TerminalConnect the USB memory to use[USB media player]. Also, thiscan be used to supply power ofup to 5V/1A to an external devicewhen the picture is displayed.9 IR IN, IR OUT: Infrared Signal Input / OutputTerminalUse this when operating morethan one display with one remotecontrol.10 SERIAL IN,SERIAL OUT:SERIAL Input / Output TerminalControl the Display by connectingto PC.11 Micro-USB: Micro-USB TerminalBy connecting the unit to the PCusing the Micro-USB cable, datain the storage of the OpenPortPLATFORM system can be reador written from the PC.