Panasonic TH-50PF50U Operating Instructions Manual

Also see for TH-42PF50U: Operating instructions Operating instructions Manual Del Usuario

Contents

Panasonic TH-50PF50U Operating Instructions Manual Manual pdf 52 page image

3D Y/C FILTER (NTSC)COLOR SYSTEMSIGNALONAUTO3 : 2 PULLDOWN OFF[ VIDEO ]NOISE REDUCTION OFF3 : 2 PULLDOWNSIGNALOFF[ Digital ]NOISE REDUCTION OFFH-FREQ.V-FREQ.kHzHz63.9860.02DOT CLOCK FREQ. MHz108.0SIGNAL FORMAT 1280×1024/60iSIGNAL [ COMPONENT ]XGA MODE AUTONOISE REDUCTION OFFH-FREQ.V-FREQ.kHzHz63.9860.02SIGNAL FORMAT 1280×1024/60iSYNC3 : 2 PULLDOWNAUTOOFFSYNCSIGNALH-FREQ.V-FREQ.kHzHz63.9860.02SIGNAL FORMAT 1280×1024/60i[ RGB ]3 : 2 PULLDOWNXGA MODENOISE REDUCTION OFFAUTOOFFAUTO• 3D Y/C FILTER (NTSC)This menu is displayed when BNC Dual Video Terminal Board (TY-FB9BD) is installed to the unit.Set this menu when the moving image looks unnatural during Video (S Video) input signal.ON OFFNote:When ON, this setting only affects NTSC input signals.• COLOR SYSTEMAUTO SECAM M.NTSC NTSCPALSet the color system to match the input signal. When “AUTO” is set, COLOR SYSTEM will be automatically selectedfrom NTSC/PAL/SECAM/M.NTSC.To display PAL60 signal, select “AUTO” or “PAL”.If the image becomes unstable:With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases becomeunstable. Should this occur, set the system to match the format of the input signal. 3:2 PULLDOWNWhen “ON”, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, whichare recorded at 24 frames per second.If the picture is not stable, turn the setting to “OFF”.ON OFFNote:When ON, this setting only affects the following signal input:• NTSC / PAL signal input during Video (S Video) input signal.• 525i(480i), 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal.• XGA MODEThis menu is displayed when the input signal is analog (Component/PC).This unit supports three types of XGA signals with 60Hz vertical frequency having different aspect ratios and samplingrates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).AUTO 1024×768 1280×768 1366×768AUTO: Automatically selected from 1024×768/1280×768/1366×768.Switch the setting to suit the input signal for better display depends on the angle of view or display resolution condition.Note:After making this setting, be sure to make each adjustment (such as “AUTO SETUP”) on the “POS./SIZE” menu asnecessary. (see page 26)52Note:“SIGNAL” setup menu displays a different setting condition for each input signal.Select “SIGNAL” in “SETUP” menu and press button.SETUP for Input SignalsSIGNAL menuFor VIDEO (S VIDEO) For RGBFor COMPONENT For Digital