Panasonic TH-50PB2W Operating Instructions Manual

Also see for TH-50PB2W: Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Panasonic TH-50PB2W Operating Instructions Manual Manual pdf 13 page image

13Network SetupPress ź to go to the next item.3 Make the settings related to the wireless connection between the Display and the network.SSID10OpenAuthenticationEncryptionChannelNoneAD HOCModeƔ : If the mode is [AD HOC], enter the same character string as that of SSIDset on the computer to be connected. If the mode is[INFRASTRUCTURE], enter the SSID registered at the access point.Entering characters page 15SSID has to be entered in alphanumeric letters.•You cannot set “any” or “ANY” for SSID.•ModeƔAD HOC : Connect Display and computer directly without access point.INFRASTRUCTURE : Connect through access point.AuthenticationƔ : Set the user authentication method used by the network to be connected.Open : Select when making a connection using [AD HOC], or when the accesspoint authentication method is OpenSystem.Shared : Select when making a connection using [AD HOC], or when the accesspoint authentication method is Shared Key.WPA-PSK ¼WPA2-PSK ¼WPA-EAP/WPA2-EAP ¼WPA-EAP ¼WPA2-EAP ¼: Available when the mode is set to [INFRASTRUCTURE].¼EncryptionƔ : Select the encryption method to be used for communication between theDisplay and the network.None : Select when transmit without encryption. It is selectable only when[Authentication] is [Open] or [Shared].WEP : Select when Encryption is WEP.TKIP : Select when Encryption is TKIP.Selectable when [Authentication] is either [WPA-PSK], [WPA2-PSK],[WPA-EAP], [WPA2-EAP].AES : Select when Encryption is AES.Selectable when [Authentication] is either [WPA-PSK], [WPA2-PSK],[WPA-EAP], [WPA2-EAP].ChannelƔ : Refer to page 6 for usable channels.Important video/audio data is protected because AES encryption programming takes place in advance forall network numbers, even if [Encryption] is set to [None].