Panasonic TH-50PB2W Operating Instructions Manual

Also see for TH-50PB2W: Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Panasonic TH-50PB2W Operating Instructions Manual Manual pdf 12 page image

12Con¿guration of Wireless LAN [USER1] - [USER3]Select [USER1] – [USER3] for [Wireless LAN].1 Wireless LANSaveWireless LAN255.255.255. 0192.168. 0. 1192.168. 10. 100USER1IP addressSubnet maskGatewayAD HOCModeName ChangeSSIDDHCP OffAddress settings1 Select the item and press .I192.168. 0. 8IP address2 Use ŻŹ to select a digit.3 Use Ÿź to change a number.4 Press .Pressing will cancel the address change.Set [DHCP].2 When [Off] is selected, IP address and other settings can be set manually.Name Change You can change the user name. Entering characters page 15DHCP(DHCP client function)On: If a DHCP server exists in the network to which the display isconnected, the IP address will automatically be acquired.Off: If a DHCP server does not exist in the network to which thedisplay is connected, additionally set [IP address], [Subnet mask]and [Gateway].IP address(Display of IP address and setting) Enter the IP address if DHCP server is not used.Subnet mask(Displaying and setting the subnetmask)If not using a DHCP server, enter the subnet mask.Gateway(Display of gateway address andsetting)Enter the gateway address if DHCP server is not used.If [DHCP] is set to [On], the IP address and other items are not displayed. Check the [Status] page for the current• IP address and other items. (See page 17)Before using the DHCP server, make sure the DHCP server is already functioning.•For details of IP address, subnet mask, and gateway, ask the network administrator.•A wired LAN and wireless LAN cannot be used in the same segment.•Network SetupSelect [Save] and press3 button.Save the current network settings.Default settings of [M-DIRECT]Ŷ The following settings as [M-DIRECT] in the [Wireless LAN] are set before the Display leaves the factory.IP address 192.168.12.100Subnet mask 255.255.255.0SSID M-DIRECT + The last 4 digits of the Display IDChannel 1Key The same string as the SSIDThe authentication method is WPA2-PSK, and the encryption method is AES. Both methods are ¿xed.•When you need to change initial con¿guration of [M-DIRECT], please contact your network administrator.•Make sure the initial Key is changed for safety.•As the DHCP server is already functioning, select [ON] before connecting a computer.•