English 23● Use the 3D Eyewear within approximately 3.2 m fromthe TV. You cannot view the 3D images with the 3DEyewear too far from the TV, because of the difficultyof receiving radio waves from the TV.● The range may be shortened depending on theobstacles between the TV and the 3D Eyewear, or thesurrounding environment.● When viewing 3D images, make sure your eyes arein a horizontal position where double vision does notoccur.● If the room is lit by fluorescent lights (50 Hz) and lightappears to flicker when using the 3D Eyewear, switchoff the fluorescent light.● There are differences in the viewing range of the 3DEyewear among individuals.Viewing 3D imagesYou can enjoy viewing 3D images of content orprogrammes supporting 3D effects by wearing the 3DEyewear (optional).● The 3D Eyewear must be worn to view 3D images.● When using the 3D Eyewear, please also read themanual of the 3D Eyewear.● This TV supports [Frame Sequential]*, [Side by Side]and [Top and Bottom] 3D formats. (3D content in 4Kformat is not supported.)● For details, refer to [eHELP] (Watching > 3D).*:Frame Sequential is the 3D format that the images forright and left eyes are recorded with high definitionquality and alternately played back.To view the 3D images● Use Panasonic 3D Eyewear supporting Bluetoothwireless technology for active shutter 3D.■ Playing back 3D-compatible Blu-ray disc(Frame Sequential format)● Connect the 3D-compatible player via a fullywired HDMI compliant cable. (If you use the non3D-compatible player, the images will be displayed in2D mode.)● If the input mode is not switched automatically, selectthe input mode connected to the player using the AVbutton.■ 3D-supported broadcast● Please consult the suppliers of content orprogrammes for availability of this service.■ 3D photos and 3D videos taken by3D-compatible Panasonic products● Available in Media Player and Network services.■ 2D images converted to 3D● Set to [2D→3D] mode in [3D Mode Selection]([Picture] > [3D Settings] > [3D Mode]). (Content in 4Kformat cannot be converted to 3D mode.)Ensure that the registration of the 3D Eyewear hasbeen completed. For details, read the manual of the 3DEyewear.1 Turn the 3D Eyewear on and put it onConnection status and battery status are displayed onthe bottom right of the screen.2 View the 3D imagesSafety precautions will be displayed when you firstwatch the 3D image. Select [Yes] or [No] to continue toview 3D images.Note● Turn off the 3D Eyewear after using it.