11Basic ControlsMENU Screen ON / OFFEach time the MENU button is pressed, the menu screenwill switch. (see page 13)Volume AdjustmentVolume Up “+” Down “–”When the menu screen is displayed:“+” : press to move the cursor up“–” : press to move the cursor down(see page 13)Remote controlsensorMain Power On / Off SwitchSpeakersBrightness SensorDetects the brightness in the viewingenvironment.Main UnitPower IndicatorThe Power Indicator will light.• Power-OFF .... Indicator not illuminated (The unitwill still consume some poweras long as the power cord is stillinserted into the wall outlet.)• Standby ........ Red• Power-ON ...... Green• Power management (DPMS).......................Orange (PC IN or DVI-D INsignal.)When this function is set to On, it operatesunder the following conditions to turn the poweron or off automatically.When no pictures are detected for 30 or soseconds during input from PC IN or DVI-D INterminal:→ Power is turned off (standby); the powerindicator lights up orange.When pictures are subsequently detected:→ Power is turned on; the power indicator lightsup green.• No activity power off....................... RedWhen this function is set to “Enable”, the poweris turned off (standby) automatically when thereis no operation of the Plasma Display for 4 hours.Starting from 3 minutes before the turn off, theremaining time will be displayed.No activity power off 3minPress any key to abort.Enter / Aspect button(see page 13)INPUT button(INPUT signal selection)(see page 10)Normal Viewing PictureSound Pos. /Size Setup