Panasonic TH-42PX60U Operating Instructions Manual

Also see for TH-37PX60U: Technical guide Operating instructions manual Operating instructions Service manual Operating instructions

Panasonic TH-42PX60U Operating Instructions Manual Manual pdf 40 page image

40• FULL • JUSTFULL JUSTEnlarges the 4:3 image horizontally to the screen’sside edges.(Recommended for anamorphic picture)Stretches to justify the 4:3 image to the four cornersof the screen.(Recommended for normal TV broadcast)• H-FILL • 4:3H-FILLEnlarges the 4:3 image horizontally to the screen’sside edges. The side edges of the image are cut off.Standard(Note that “after image” of the side bar may occur fromdisplaying it for a long time.)• ZOOMZOOMEnlarges the 4:3 image to the entire screen.(Recommended for Letter Box)• Zoom adjustVertical image position and size can be adjusted in “ZOOM.”Select “Zoom adjust” on the Picture menu. (p. 20)Vertical position adjustment Vertical size adjustmentTechnical InformationAspect RatioLet you choose the aspect depending on the format of the received signal and your preference. (p. 15)• For viewing Closed Caption of digital broadcasting, set the aspect ratio to FULL.(If viewing with H-FILL, JUST, ZOOM or 4:3, characters will be cut off.)• The closed caption is not displayed when you use HDMI connection.• If analog connected equipment is used for displaying or recording, closed caption (CC) should be set On/Off on theconnected equipment.The CC mode setting of the TV will not affect the analog input.If a digital program is being output in analog format, the CC data will also be output in analog format.If digital connected equipment is used for input, CC should be set to On on either the connected equipment or theTV.If CC is set On on both the connected equipment and the TV, captions from each unit will overlap.Closed Caption (CC)Side bar• To reset the aspect ratio (OK)• 480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9) : FULL,JUST, 4:3 or ZOOM• 1080p / 1080i / 720p : FULL, H-FILL, JUST, 4:3 or ZOOM.• When the signal is 720p/1080i/1080p, the aspect modeautomatically defaults to Full after turning off the TV,after changing input mode, or after changed signalresolution other than 720p/1080i/1080p.Note