1 Applicable signals 42 Safety Precautions 52.1. General Guidelines 53 Prevention of Electro Static Discharge (ESD) toElectrostatically Sensitive (ES) Devices 64 About lead free solder (PbF) 75 PCB Structure sheet of GP9D chassis 86 Service Hint 97 Disassembly 107.1. Removal of the Back Cover 107.2. Removal of the HU-Board 107.3. Removal of the HA-Board 107.4. Removal of the Slot Block 107.5. Removal of the J-Board 117.6. Removal of the HX-Board 117.7. Removal of the DA-Board 117.8. Removal of the P-Board 127.9. Removal of the D-Board 127.10. Removal of the H3-Board (L, R) 127.11. Removal of the SU-Board and the SD-Board 127.12. Removal of the SC-Board 137.13. Removal of the SS-Board 137.14. Removal of the C1, C2-Board 137.15. Removal of the S1-Board 147.16. Removal of the Escutcheon 147.17. Removal of the V1-Board and the V2-Board 157.18. Removal of the Plasma Panel 158 Location of Lead Wiring 188.1. Location of Lead Wiring (1) 188.2. Location of Lead wiring (2) 188.3. Location of Lead wiring (3) 198.4. Location of Lead Wiring (4) 199 Adjustment Procedure 209.1. Driver Set-up 209.2. Initialization Pulse Adjust 219.3. P.C.B. (Printed Circuit Board) exchange 219.4. Adjustment Volume Location 229.5. Test Point Location 2210 Service mode 2310.1. CAT (computer Aided Test) mode 2310.2. IIC mode structure (following items value is sample data.)2611 Adjustment 2711.1. RGB white balance adjustment 2711.2. HD white balance adjustment 2911.3. Power control adjustment 3112 Trouble shooting guide 3212.1. Self Check 32AUDIO IN (RCA PIN JACK × 2) 0.5 Vrms (high impedance)PC (HIGH-DENSITY Mini-D-SUB 15PIN) R,G,B / 0.7 Vp-p (75Ω)HD, VD / 1.0-5.0 Vp-p (high impedance)ComponentY:1.0 Vp-p (75Ω: include sync)PB / C B:0.7 Vp-p (75Ω)P R / C R :0.7 Vp-p (75Ω)AUDIO IN (M3 JACK) 0.5 Vrms (high impedance)SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLESPEAKERS (6Ω) 16W [8 W + 8W] (10% THD)Accessories SuppliedRemote Control Transmitter EUR7636070RBatteries 2 × AA SizeFixing bands (TMME203 or TMME187) × 2Dimensions (W × H × D) 40.2” (1,020 mm) × 24” (610 mm) × 3.5” (89 mm)Mass (weight)main unit only approx. 57.3 lbswith speakers approx. 66.1 lbsNotes:· Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.CONTENTS Page Page2TH-42PS9UK
