19Adjusting Pos. / Size1 Press to display the Pos. /Size menu.Press to select H-Pos / H-Size / V-Pos / V-Size /Clock Phase.Press to adjust Pos. / Size.Press to exit from adjust mode.32Notes:• Adjustment details are memorized separately for different input signal formats(Adjustments for component signals are memorized for 525 (480) / 60i · 60p,625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250(1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals arememorized for each frequency.)• If a “Cue” or “Rew” signal from a VCR or DVD player is received, the pictureposition will shift up or down. This picture position movement cannot becontrolled by the Picture Pos./Size function.• If adjusting the Picture V-Pos/V-Size in Panasonic Auto with 16:9 mode, theadjustment is not memorized. When exiting the mode, the screen will returnto a former adjustment.NormalNormalisePos. /Size0000V-PosH-PosV-SizeH-SizeNormalNormalisePos. /Size00000V-PosH-PosV-SizeH-SizeClock PhaseWhile the Pos. / Size display is active, if either the N button on the remote control is pressed at any time or the ACTION( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.Helpful Hint ( / Normalise Normalisation)4During “RGB / PC” input signal.During “AV(S Video)”, “Component”and “Digital” input signal.H-Pos Adjust the horizontal position. H-Size Adjust the horizontal size.V-Pos Adjust the vertical position. V-Size Adjust the vertical size.Clock Phase(RGB/PC in mode)Eliminate the flickering and distortion.