Panasonic TH-42PH20ER Operating Instructions Manual

Also see for TH42PH20ER: Operating instructions

Contents

Panasonic TH-42PH20ER Operating Instructions Manual Manual pdf 9 page image

VIDEO and COMPONENT / RGB IN connection,Y, PB , P ROUTP RP BYAUDIOOUTRLVIDEOOUTAUDIOOUTRLNotes:• Change the “Component/RGB -in select” setting in the “Setup”menu to “Component” (when Component signal connection) or“RGB” (when RGB signal connection). (see page 38)• Accepts only RGB signals with “Sync on G”.RCA-BNCadapter plugRCA-BNCadapter plugDVD PlayerVCRComputer RGB CamcorderNote:Additional equipment, cables and adapter plugs shown are not supplied with this set.9ConnectionsVideo equipment connectionSLOT:Terminal board (optionalaccessories) insert slot (seepage 4)Note:The right side slot is for terminalboard with 2-slot width. Theterminal board with 1-slot widthdoes not function when installed inthe right side slot.AV IN (VIDEO): Composite Video Input Terminal (see below)COMPONENT/RGB IN: Component/RGB Video Input Terminal(see below)AV IN (HDMI): HDMI Input Terminal (see page 10)DVI-D IN: DVI-D Input Terminal (see page 10)Connect to video equipment such as VCR or DVD player.PC IN: PC Input TerminalConnect to video terminalof PC or equipment withY, PB (C B ) and P R (C R )output (see page 11).SERIAL:Control thePlasma Displayby connectingto PC (seepage 12)Terminals are on the bottom side of the Plasma Display.