Panasonic TH-42LFP30W Operating Instructions Manual

Also see for TH-42LFP30W: Brochure Specification Operating instructions Service manual

Contents

Panasonic TH-42LFP30W Operating Instructions Manual Manual pdf 3 page image

3Power cableTo keep the waterproof property, do not loosen the part fixingthe power cable to the rear plate.Do not force to bend the protruding part of the power cable.This may cause disconnection.Protective coatingCabinet aluminum parts and rear plate are protected from corrosion wth coating. Be careful not to damagethe surface. In case the surface is damaged, corrosion may occur from there.Installation positionDo not install the product to a place where the product is exposed to direct sunlight.• If the screen is exposed to direct sunlight, the liquid crystal panel may have adverse effect.• When direct sunlight is on the screen, black shadow may appear. This will disappear when the temperaturedrops.• To avoid direct sunlight, installing a “canopy” above this product is recommended.• To install the product long term in a special environment such as near a swimming pool, hot spring, or ocean, or ina factory uses chemicals or gases, please consult your local Panasonic dealer beforehand.Installation conditionsTo use the product in an environment where outdoor air temperature is lower than 39 °F (4 °C), make sureto set the “Winter Mode” to “On”. The inside temperature is kept constant and the startup can be performedsmoothly.Do not exhibit or use this product in a condition where water splashes on to it continuously for long time.To install on a wall etc.• Consult your dealer about fittings etc. beforehand.• Choose a permanent position where the total weight of the product and fittings can be hold permanently. If thestrength of the position is not sufficient, a serious accident such as fall may be caused.• Do not install the product where a person can be hang or lean on, or a passer may collide into. Accident may becaused.• Take measures for tipping over and fall with an assumption of a fitting or installation location failure.• Installation strength may be degraded due to aging depends on the environment. Ask a installation professional toinspect or repair regularly.• When an abnormality or fault such as loose screw is detected, ask an installation professional or your dealerimmediately for repair.• Panasonic will not be responsible for any damages from an accident such as defect of installation, improper use,modification, or natural disaster.Precautions for Installation