Panasonic TH-42LF25W Service Manual

Also see for TH-42LF25W: Operating instructions

Panasonic TH-42LF25W Service Manual Manual pdf 22 page image

22TH-42LF25W / TH-47LF25W8.15. Replacement method forRC+LED board1. Slide the 2 fittings on the inside of the cabinet front towardthe outside and remove.2. Remove the FFC cable from the RC+LED board's coupler(K19I), and replace the board with the replacementboard.3. When replacing the cabinet front, remove the shield RCand the DEC LED (clear plate) on the inside.The gasket is affixed to the shield RC. When replacing,also replace the gasket.4. The spacer sheet and the gasket are affixed to the fittingsthat hold down the RC+LED board.When replacing the fittings, also replace the spacer sheetand the gasket.8.16. Cabinet front replacementPrecautions when replacing• The parts that are necessary for replacement (spacer sheet,Panasonic badge, etc.) are not included. They are suppliedas replacement parts. Replace them at the same time as thecabinet front.1. Remove the spacer sheet that is affixed to the inside ofthe cabinet front.2. Slide off the mounting and remove it from the cabinetfront.3. Affix the Panasonic badge to the replacement cabinetfront beforehand.