Panasonic TH-42LF25W Operating Instructions Manual

Also see for TH-42LF25W: Service manual

Panasonic TH-42LF25W Operating Instructions Manual Manual pdf 42 page image

OptionsEnableOff-timer functionNormalInitial Power ModeOffPower On Screen DelayOffClock Display2/2Power On Message (No activity power off)OnOptions 1/2Initial inputOn screen display OnOffOffOff00Maximum VOL levelInitial VOL levelOffInput lockOffButton lockOffRemocon User level41Options AdjustmentsItem AdjustmentsOn screen displayOn: Displays all the following on screen.• Power on display• Input signal switch display• No signal display• Mute and the remaining time of off-timer after was pressed.Off: Hides all the items above from view.Initial inputAdjusts the input signal when the unit is turned on.Off VIDEO Component/RGB PC DVI HDMI1 HDMI2 OffNotes:• Only the adjusted signal is displayed. (see page 15)• This menu is available only when “Input lock” is “Off”.Initial VOL levelPress button to adjust the volume when the unit is turned on.Off OnOff: Sets normal volume.On: Sets your preferred volume.Notes:• When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.• You can hear the changed volume regardless of your volume setting before opening the options menuif you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.Maximum VOL levelPress button to adjust the maximum volume.Off OnOff: Sets auto maximum volume.On: Sets your preferred maximum volume.Notes:• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automaticallybecomes the same as the “Maximum VOL level”.• The volume display can go up to 100 regardless of the settings.• You can hear the changed volume regardless of your volume setting before opening the options menuif you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.Input lockLocks the input switch operation.Off VIDEO Component/RGB PC DVI HDMI1 HDMI2 OffNotes:• Only the adjusted signal is displayed (see page 15).• Input switch can be used when this is set to “Off”.1 Press to display the Setup menu.5 Press to exit from Options menu.243Press to select “OSD Language”.Press for more than 3 seconds.Press to select “Options”.Press to display the Options menu.Press to select your preferred menu.Press to adjust the menu.OptionsShipping