Panasonic TH-42LF25W Operating Instructions Manual

Also see for TH-42LF25W: Service manual

Panasonic TH-42LF25W Operating Instructions Manual Manual pdf 30 page image

ScreensaverStartMode OffPRESENT TIME MON 0 : 021/2SignalInput labelWobblingSetupPower management OffOffStandby save OnECO OffOSD Language English(UK)Component/RGB-in selectRGBScreensaverDisableNo activity power offDisableNo signal power off29Screensaver (For preventing image retention)Do not display a still picture, especially in 4:3 mode, for any length of time.If the display must remain on, a Screensaver should be used.When the screen saver is operating, the following 5 patterns are displayed full screen for 5 seconds each.BlackDark GrayGrayLight GrayWhite213Press to display the Setup menu.Press to select Screensaver.Press to display Screensaver screen.Mode selectionStart setting4 When the Mode is set to On, press to select Start.Press to start Screensaver.The menu screen will disappear and the Screensaver will be activated. To stop theScreensaver under On, press the R button or any buttons on the main unit.Note: When the display is turned off, the Scrensaver will be deactivated.Press to select Mode.Press to select eachmode items.OffInterval : Operates when Periodic Time and OperatingTime are setup and those times arrive.Time Designation : Operates when Start Time and Finish Timeare setup and those times arrive.Standby after SCR Saver : Operates while Screensaver duration, anddisplay enters standby mode.On : Operates when Start is selected and theACTION ( ) button is pressed.