Panasonic TH-37PW7BX Operating Instructions Manual

Also see for TH-37PW7BX: Service manual Service manual Service manual

Panasonic TH-37PW7BX Operating Instructions Manual Manual pdf 33 page image

33Setup for Input SignalsAuto PAL SECAM M.NTSC NTSCR1/2PCOffStandby save OffPower management OffAuto power off OffOSD Language English (UK)Component / RGB-in selectRGBInput labelSignalPower saveSetup3D Y/C Filter (NTSC)Colour systemSignalOnAutoCinema realityPanasonic Auto (4 : 3)Off4 : 3[AV]P-NR Off1/2PCOffStandby save OffPower management OffAuto power off OffOSD Language English (UK)Component / RGB-in selectRGBInput labelSignalPower saveSetup3D Y/C Filter (NTSC)Colour systemSignalOnAutoCinema realityPanasonic Auto (4 : 3)Off4 : 3[AV]P-NR OffCinema realityP-NRSignalOffOff[Component]Cinema realityP-NRSignalOffOffH-Freq.V-Freq.kHzHz33.860.0[DVI]SyncP-NRSignalAutoH-Freq.V-Freq.kHzHz33.860.0[RGB]Cinema reality OffOffColour system / Panasonic AutoSelect Signal from the “Setup” menu during AV(S Video) input signal. (“Signal[AV]” menu is displayed.)Press to select the “Colour system” or“Panasonic Auto”.Press to select each functions.If the picture image becomes unstable:With the system set on Auto, under conditions of low level or noisy inputsignals the image may in rare cases become unstable. Should this occur,set the system to match the format of the input signal.ModeColour systemPanasonic Auto(4:3)FunctionSet the colour system to match the input signal. If set to “Auto”, the colour system is determinedautomatically.Set to “4 : 3” to view 4:3 images in an unchanged format when Panasonic Auto isselected. If you would like to view 4:3 images in Just format, set to “Just”.Cinema reality / P-NRPress to select Cinemareality or P-NR.Press to set On / Off.Press to exit from adjust mode.Cinema reality:When on, the display attempts to reproduce a more natural interpretation of sourcessuch as movie pictures, which are recorded at 24 frames per second.If the picture is not stable, turn the setting to off.Note:When On, this setting only affects the following signal input:• NTSC / PAL signal input during “AV(S Video)” input signal.• 525i(480i) 625i(575i), 1125(1080) / 60i signal input during “Component” inputsignal.Press ACTION ( ) buttonPress ACTION ( ) button12P-NR:Automatically reduces unwanted picture noise.Note:P-NR cannot be adjusted while a PC signal is being applied.