Panasonic TH-37PR10U Service Manual

Also see for TH-42PR10U: Operating instructions Operating instructions manual Manual de instrucciones

Contents

Panasonic TH-37PR10U Service Manual Manual pdf 45 page image

11.3. Power control adjustmentInstrument Name Connection Remarks· PC (RGB) signal generator(Leader: VGA/No.9 signal)· Wattmeter· PC input· Connect the AC power of theadjustment set to the wattmeter.Set “RGB” at ‘COMPONENT/RGB-INSELECT’ in Setup Menu.Procedure Remarks[condition]· Make sure the set is aged for 30 minutes or more before adjustment.· Voltage 120V 50/60Hz (variation within 1%)· Volume at minimum and screen size at full· PC input and picture menu at normalized Dynamic1. Connect the set’s AC power to the wattmeter.2. Receive the VGA No.9 signal from Leader.3. Select the PWRCTL item in Panel APL/ABL in the IIC mode.4. Adjust PWRCTL so the set´s power consumption is description below.Adjust to shift large to small for DAC.Factory adjustment with OSD37" 272 0 / -10W42" 320 0 / -10WNo.9 SignalTop half: Full color barBottom half: Horizontal 16 steps barNotes:1. When passing through factoryadjustment mode, the power fewwatts which goes down is theconsideration being completed.2. Adjust the large number for DACwhen they have 2 adjustmentpoints.45TH-37PR10U / TH-42PR10U