Panasonic TH-37PR10U Operating Instructions Manual

Also see for TH-42PR10U: Operating instructions manual Service manual Manual de instrucciones

Panasonic TH-37PR10U Operating Instructions Manual Manual pdf 19 page image

1900000NORMALNORMALIZEPOS. /SIZEV-POSH-POSV-SIZEH-SIZECLOCK PHASE0000NORMALNORMALIZEPOS. /SIZEV-POSH-POSV-SIZEH-SIZEAdjusting POS. /SIZE1 Press to display the POS. /SIZE menu.Press to select H-POS / H-SIZE / V-POS / V-SIZE /CLOCK PHASE.Press to adjust POS. /SIZE.Press to exit from adjust mode.During “VIDEO (S VIDEO)”,“COMPONENT” and “Digital” input signal.During “RGB / PC” input signal.32Notes:• Adjustment details are memorized separately for different input signal formats(Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625(575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i,750 (720) / 60p · 50p each, and RGB/PC/Digital signals are memorized for eachfrequency.)• If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture positionwill shift up or down. This picture position movement cannot be controlled by thePOS. /SIZE function.• If adjusting the PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode,the adjustment is not memorized. When exiting the mode, the screen will returnto a former adjustment.While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.Helpful Hint ( / NORMALIZE Normalization)4H-POS Adjust the horizontal position. H-SIZE Adjust the horizontal size.V-POS Adjust the vertical position. V-SIZE Adjust the vertical size.CLOCK PHASE(RGB/PC in mode)Eliminate the flickering and distortion.