English 7Installing the wall-hanging bracket■ When using the wall-hanging bracketChoosing to wall mount the TV shall be done at theowner’s risk. Always use a qualified installer to performa TV wall bracket installation. Incorrect fitting may causeequipment to fall, resulting in injury and product damage.Any such damage will void your warranty.● Holes for wall-hanging bracket installationRear of the TVaba: 200 mmb: 200 mm(View from the side)Depth of screwminimum: 9 mmmaximum: 14 mmType of screw: M4Screw for fixing the TV onto thewall-hanging bracket (not supplied withthe TV)Warning● Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself have the risk of personalinjury and product damage. In order to maintain theunit’s performance and safety, be absolutely sure toask your dealer or a licensed contractor to securethe wall-hanging brackets. Any damage caused byinstalling without a qualified installer will void yourwarranty.● Carefully read the instructions accompanying optionalaccessories, and be absolutely sure to take steps toprevent the TV from falling off.● Handle the TV carefully during installation sincesubjecting it to impact or other forces may causeproduct damage.● Take care when fixing wall brackets to the wall.Always ensure that there are no electrical cables orpipes in the wall before hanging bracket.● To prevent fall and injury, remove the TV from its fixedwall position when it is no longer in use.FrontB2Correct WrongTopView Front (Display) Front (Display)SideView Front(Display)Front(Display)Removing the pedestal from the TVBe sure to remove the pedestal in the following waywhen using the wall-hanging bracket or repacking theTV.1 Lay the TV on a foam mat or thick soft cloth on atable.2 Remove the assembly screws from the TV.3 Pull out the pedestal from the TV.4 Remove the assembly screws from the bracket