Panasonic TCP50ST50X User Manual

Also see for TCP60ST50X: Service manual

Contents

Panasonic TCP50ST50X User Manual Manual pdf 12 page image

Watching TVCable / Satellite / Fiber with a boxInitial setting1. ConnectingSelect the wiring method connecting your box to the TV, AV IN orAntenna/Cable in.Tip: HDMI will provide the best HD picture2. Change INPUTINPUTPress the INPUT button to select the proper connection. Wait 2 seconds.3. Power on your Cable , Satellite or Fiber boxUse the box's remote control to change channels.* If the box is connected to the TV using a COAX cable (Antenna/Cable in), thenset the TV channel to CH3 or CH4. Note that the picture will not be in HD.* CC/SAP is not available when watching TV with a Cable or Satellite boxconnected via HDMI.* If your box is a high definition, then check that it is outputting 720p or 1080isignal.Tip: press the TV's INFO button to verify.* Check your box "aspect" or "format" settings. It should be set to 16:9,Widescreen or FULL.* If the audio volume is too low, check the box's audio settings.* Contact your Cable or Satellite provider for instructions on any box settings.12