Panasonic TC-P55GT30 Service Manual

Also see for VIERA TC-P55GT30: Owner's manual Specification sheet User guide Owner's manual Owner's manual

Panasonic TC-P55GT30 Service Manual Manual pdf 27 page image

279.15. Remove the Stand bracket1. Remove the Plasma panel section from the servicingstand and lay on a flat surface such as a table (coveredby a soft cloth) with the Plasma panel surface facingdownward.2. Unlock the cable clampers to free cable.3. Remove the Stand bracket fastening screws (×10 , ×4, ×4 ) and the Stand bracket.9.16. Remove the K-Board1. Remove the SP shield metal L. (See section 9.14.)2. Remove the Stand bracket. (See section 9.15.)3. Remove the screw (×1 ).4. Remove the claws (×3 ).5. Disconnect the connector (K1) and remove the K-Boardfrom the LED panel.9.17. Remove the S-Board1. Remove the SP shield metal L. (See section 9.14.)2. Remove the screws (×2 ).3. Disconnect the connector (S10) and remove the S-Board.9.18. Remove the V-Board1. Remove the SP shield metal R. (See section 9.14.)2. Remove the Stand bracket. (See section 9.15.)3. Remove the screw (×1 ) and remove the claws (×3).4. Disconnect the connector (V14) and remove the V-Boardfrom the 3D LED panel.9.19. Remove the Bottom cabinetassy1. Remove the Speakers. (See section 9.14.)2. Remove the Stand bracket. (See section 9.15.)3. Remove the K, S and V-Board. (See section 9.16 - 18.)4. Remove the screws (×2 ) and remove the Bottom cab-inet assy.