116.3. Hotel mode1. PurposeRestrict a function for hotels.2. Access command to the Hotel mode setup menuIn order to display the Hotel mode setup menu:While pressing [VOLUME (-)] button of the main unit,press [INPUT] button of the remote control three timeswithin 2 seconds.Then, the Hotel mode setup menu is displayed.3. To exit the Hotel mode setup menuSwitch off the power with the [POWER] button on themain unit or the [POWER] button on the remote control.4. Explain the Hotel mode setup menuItem FunctionMode Select hotel mode off/onInput Select input signal modes.Set the input, when each time power isswitched on.Selection:-,RF,HDMI1,HDMI2,HDMI3,HDMI4,Comp./Video,PC• OFF: give priority to a last memory.Channel Select channel when input signal is RF.Set the channel, each time power is switchedon.Selection:Any channel number or [-].[-] means the channel when turns off.Volume Adjust the volume when each time power isswitched on.Range:0 to 100Vol. Max Adjust maximum volume.Range:0 to 100OSD Ctrl Restrict the OSD.Selection:Off/Pattern1• Off: No restriction• Pattern1: restrictionFP Ctrl Select front key conditions.Selection:Off/Pattern1/All• Off: altogether valid.• Pattern1: only input key is valid.• All: altogether invalid.Pow Ctrl Select POWER-ON/OFF condition when ACpower cord is disconnected and thenconnected.Off: The same condition when AC powercord is disconnected.On: Forced power ON condition.