62Questions AnswersNetworkingHow do I get EASY IPTV to workon my TV?1. You need a broadband (high speed) Internet service with aspeed of no less than 1.5 Mbps (p. 39).2. Connect the TV to the Internet through your router by anEthernet cable or a compatible Panasonic USB wirelessadapter.3. Run the “Connections Test”, under the Network Settingsmenu.If Connection test fails, then check with your Internetservice provider or router/modem manufacturer if there arefirewall, content filter or proxy settings that may block theTV from accessing the Internet.How do I check for the latestsoftware (firmware) version formy TV?In the main menu, select “Setup”. Highlight “NetworkSettings” and press OK. Select “Software Update”. Thecurrent version and latest version software will be shown. Ifsoftware update is “grayed out”, the TV is not connected tothe Internet. If newer version is available, update your TV.Follow the on-screen instructions, do not power off the TVuntil the update is complete. Be patient; firmware updatemay take a while.Can I use any USB WiFi adapterto connect the TV to mywireless network?The TV’s internal software was designed to work withPanasonic’s wireless adapter model DY-WL10*. Checkwww.panasonic.com/NetConnect for updated information.How do I reset my TV to allfactory defaults and settings?In the main menu, select “Setup”. Highlight “Reset toDefaults” and press OK. Enter your password (if createdearlier) or create a temporary new password. Select Yes toreset the TV.* Model number is subject to change without notice.