6Attaching the pedestal to TV■Assembling the pedestal[TC-58PS14 (TBLX0102)] [TC-65PS14 (TBLX0126)]Fix securely with assembly screwsA . (Total 4 screws)Tighten screws firmly.Fix securely with assembly screws A .(Total 6 screws)Tighten screws firmly usingAllen wrench CALRPoleFrontPoleBaseACPoleFrontPoleBase■Set-upCarry out work on a horizontal and level surface.Tighten screws firmly.BFix securely with assembly screws B .(Total 4 screws)Rear sideArrowmarkPoleHole for pedestalinstallationPoleBaseBottom view(Image: TC-58PS14)Warning Do not disassemble or modify the pedestal.Otherwise the TV may fall over and become damaged, andpersonal injury may result.Caution Do not use any other TV and displays.Otherwise the TV may fall over and become damaged, andpersonal injury may result.Do not use the pedestal if it becomes warped or physically damaged.If you use the pedestal when it is physically damaged, personal injurymay result. Contact your nearest Panasonic Dealer immediately.During set-up, make sure that all screws are securely tightened.If sufficient care is not taken to ensure screws are properlytightened during assembly, the pedestal will not be strong enoughto support the TV, and it might fall over and become damaged, andpersonal injury may result.AC cord connectionTo attach To removeInsert it firmly until thetabs on both sides clickinto place.Keep pushing bothside snaps and pulldownAccessoriesAssembly screwsA(for 58”)M5 × 25 (Silver) (4)(for 65”)M5 × 30 (Silver) (6)B(for 58”)M5 × 30 (Black) (4)(for 65”)M6 × 25 (Black) (4)Poles (2)(for 58”)LR L or R isprinted atthe bottomof the poles.(for 65”)FrontBackBase (1)(for 58”)(for 65”)Allen wrench(included tool only for 65”)C