Panasonic TC-50PS14 Service Manual

Also see for Viera TC-P42S1: Quick setup guide Operating instructions Revised troubleshooting handbook Specifications Operating instructions

Panasonic TC-50PS14 Service Manual Manual pdf 24 page image

248 Measurements and Adjustments8.1. Adjustment Procedure8.1.1. Driver Set-up8.1.1.1. Item / Preparation1. Input a white signal to plasma video input.2. Set the picture controls as follows.Picture menu: VividNormal: SetAspect: FullCaution1. First perform Vsus adjustment.2. The Vscn voltages are measured from the Vad (Vad_base), but may be measured from the GND (GND_base) in anunavoidable case.8.1.1.2. AdjustmentsAdjust driver section voltages referring the panel data on the panel data label.Check or adjust the following voltages with the multimeter.*See the Panel label.Name Test Point Voltage Volume RemarksVsus TPVSUS (SS) Vsus ± 2V VR251 (P) *Ve TPVE (SS) Ve ± 2.5V Fixed *Vset TPVSET (SC) 290V ± 9V FixedVad TPVAD (SC) - 185V ± 1V VR16600 (SC)Vscn TPVSCN (SC) Vad_base : 145V ± 4VGND_base : - 40V ± 6VFixedVda TP9 (P) 60V + 1V, - 2V Fixed