1. PurposeRestrict a function for hotels.2. Access command to the Hotel mode setup menuIn order to display the Hotel mode setup menu, please enterthe following command (within 2 second).[TV] : Vol. “Down” + [REMOTE] : TV/VIDEO (3 times)Then, the Hotel mode setup menu is displayed.3. To exit the Hotel mode setup menuSelect the “mode” in the hotel mode setting menu is mode“off”, and switch off the power with the [POWER] button onthe main unit or the [POWER] button on the remote control.4. Explain the Hotel mode setup menuitem FunctionMode Select hotel mode ON/OFFInput Select input signal modes.Set the input, when each time power isswitched on.Selection:-/RF/COMP/HDMI1/VIDEO1/VIDEO2/VIDEO3 · Off: give priority to a last memory.Channel Select channel when input signal is RF.Set the channel, each time power is switchedon.Selection:Any channel number or “-”.“-” means the channel when turns off.Volume Adjust the volume when each time power isswitched on.Range:0 to 63Vol. Max Adjust maximum volume.Range:0 to 63OSD Ctrl Restrict the OSD.Selection:OFF/PATTERN1 · OFF: No restriction · PATTERN1: restrictionFP Ctrl Select front key conditions.Selection:Off/Pattern1/All · Off: altogether valid. · Pattern: only input key is valid. · All: altogether invalid.Pow Ctrl Select POWER-ON/OFF condition when ACpower cord is disconnected and thenconnected.OFF: The same condition when AC powercord is disconnected.ON: Forced power ON condition.13 Hotel mode26TC-26LX70L / TC-32LX70L