Panasonic TC-26LX20 Technical Manual

Also see for Combo TC-22LR30: Operating instructions Service manual

Panasonic TC-26LX20 Technical Manual Manual pdf 9 page image

LCD High Definition TV Model DifferencesDifferences between ModelsThe significant differences between models associated with the TC-22LR30 combo unitCD TV Sectionore IC series that are used for the Video Signal processing, the(TC-VD-RAM Section.A. (Circuit Board M8) is the same as that of the DVD Recorderfor servicingircuit Board Aput signal lines for the DVD Recorder Circuit were added to the Videoutput signal lines for the DVD Recorder Circuit were added to the AudioAudio Signal Process (IC3299) was added to record SAP to the DVD.ircuit Board DGtroller (IC1106) software was modified from the previous model toircuit Board RD (Main DVD Bd.)ommodate DVD Recorder.ircuit Board M8 (DVD Digital Bd.)modate the DVD Recorder. Theon the DMR-ircuit Board DV (HDMI Interface)mmodate the High Definition Multimedia Inputircuit Board P and APndary Power Circuit Board (AP) were changed to incorporatethe voltages required to power the DVD Recorder.(TC-26/32LX20 series) can be found in the following areas.LThe GC3 Global cMicrocontroller, the Video SW, and the Audio SW are same as that of the LCD TV26/32LX20).DThe DVD Digital C.B(DMR-E65). However, the software that resides in (IC6702) is different.The equipment used for servicing the DMR-E65 is same as the one usedthis model’s DVD-RAM Drive .The only difference is that the DVD Recorder (DMR) hasbeen downsized to a physically smaller drive.CThe input and outSW (IC3101).The input and oSW (IC3102).The MTS/SAPCThe Main Micro conincorporate communication with the DVD Recorder Circuit.CThis Circuit Board was added to accCThis Circuit Board was added to accomMicrocontroller (IC6001) on this Board is identical to the one that residesE65 Controller board and functions accordingly.CThis Circuit Board was added to acco(HDMI).CThe Primary (P) and Seco4