Panasonic TC-26LX20 Operating Instructions Manual

Panasonic TC-26LX20 Operating Instructions Manual Manual pdf 32 page image

32AUDIO ADJUST12Press to select AUDIO ADJUST.Press to display the AUDIO ADJUSTscreen.Press to select the sub-menu.Select the setting listening the sound.Press to activate the setting if necessary.MODE• Red display : With signalWhite display : No signalWhite display (All modes) : MONO• To change the mode using SAP button (see page 13).STEREO / SAP / MONOBASSTREBLEBALANCESURROUNDEQUALIZERBASS, TREBLE, BALANCE, SURROUND,EQUALIZERYou can change the level of each sub-menu (BASS,TREBLE, BALANCE, SURROUND, EQUALIZER) foreach MODE (AUTO, STANDARD and DYNAMIC)according to your personal preference.STEREOSAPMONOHDMI INWhen using HDMI connection (see page 11), this feature will let you switch between Analog Input and Digital Input.AUTO Automatically selects Analog / Digital signal.DIGITAL Digital Input only.ANALOG Analog Input only.CHCHVOL VOLO KCHCHVOL VOLO KAUDIO ADJUSTNORMAL+ 400DYNAMICOFF ONOFF ONAUTOMODEBASSTREBLEBALANCESURROUNDEQUALIZERSTEREO SAP MONOHDMI INPAGE1/2MENUADJUSTPICTUREAUDIOSET UPPICTURE ADJUSTPOSITION / SIZEAUDIO ADJUSTNORMAL / NORMALIZESelect “NORMALIZE” and press “OK” to return each MODE to the factory default setting.Notes:• “NORMAL” means the MODE is in the factory default setting. “NORMAL”changes to “NORMALIZE” when you change the setting of BASS,TREBLE, BALANCE, SURROUND, EQUALIZER or AUDIO LEVELER.• You can normalize each MODE separately.Menu OperationsAUDIO ADJUST PAGE2/2NORMAL0AUDIO LEVELERAUDIO LEVELERYou can adjust the volume level for each of the input mode (TV, VIDEO1, VIDEO2, COMPONENT1,COMPONENT2 and HDMI).Two channel Audio reception.Second Audio Programming( typically used for bilingual audio ).Use when stereo signal is weak.Adjusts low frequencies.Adjusts high frequencies.Adjusts left and right volume.To enjoy a concert hall effect,select ON when stereo is playing.Makes voice sound clear.Normally set to ON.AUTOSTANDARDDYNAMICAutomatically adjusts for a wide Dynamic Range.Emits the original sound.Gives contrast to sound.