Panasonic TC-26LE70 Operating Instructions Manual

Also see for TC32LE70 - LCD TV: Operating instructions Operating instructions

Contents

Panasonic TC-26LE70 Operating Instructions Manual Manual pdf 14 page image

26 27AdvancedEZ SyncTM “HDAVI Control TM”SUBSUBMENUMENUMenuAudioLockSetupTimerPictureEZ SyncSetup 2/2EZ Sync settingOther adjustAboutEZ Sync settingEZ SyncPower off linkPower on linkOnSetSetDVD recorderHome theaterHD camcorderSpeaker outputTVHome theaterHD camcorderSpeaker outputDVD recorderTVEZ SyncTM “HDAVI ControlTM”Simultaneously control all Panasonic “HDAVI Control” equipped components using one buttonon one remote.Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control”function.This TV supports “HDAVI Control 2” function.Connections to some Panasonic equipment (DVD Recorder DIGA, HD Camcorder, RAM theater,Player theater, Amplifier, etc.) with HDMI cables allow you to interface automatically.The equipment with “HDAVI Control” function enables the following operations:Automatic Input Switching, Power on link, Power off link and Speaker control (p. 27).In addition, the equipment with “HDAVI Control 2” function enables the following operation:EZ Sync Control only with TV’s remote control (for “HDAVI Control 2”) (p. 27).EZ Sync “HDAVI Control”, based on the control functions provided by HDMI which is an industry standardknown as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added.As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.■For the first time / When adding a new equipment, reconnecting the equipment, orchanging the setup.After the connection turn the equipment on and then switch the TV on.Select the input mode to HDMI 1 or HDMI 2 (p. 20), and make sure that an image isdisplayed correctly.• This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized.It is recommended that you use Panasonic’s HDMI cable.Recommended part number:RP-CDHG15 (4.9 ft./1.5 m), RP-CDHG30 (9.8 ft./3.0 m), RP-CDHG50 (16.4 ft./5.0 m)■ Press to exit frommenu screen■ Press to returnto the previousscreenSelect “Setup”Select “EZ Sync setting”3Select “EZ Sync”4selectnextDisplay menuSelect “On”(default is On)5AutomaticInputSwitching12• If no HDMI equipment is connected or standard HDMIequipment (non- “EZ Sync”) is used, set to “Off”.selectnextselectchangeAt the start of the DIGA, Player theater, or RAM theater playback, the TV’s input automatically switches to the inputbased on the playback equipment.• For the RAM theater, the speakers automatically switch to the theater system.If using the DIGA operation, the TV’s input automatically switches to the DIGA and DIGA menu is displayed.PressSelect “Speaker output”Select “Home theater” or “TV”If the “ONE TOUCH PLAY” key is pressed on the remote control for Panasonic Home Theater system, the followingsequence of operations is performed automatically.Home Theater power switches On, and playback begins.TV power switches On, and the playback screen is displayed.Audio is muted on the TV and switches to the theater system.Power onlink When “Set” is selected (p.25), TV is turned on automatically and switches to the appropriate HDMI input wheneverEZ Sync compatible equipment is initially turned on and Play mode is selected.Power offlinkWhen “Set” is selected (p.25) and the TV is turned off, all connected EZ Sync compatible equipment is alsoautomatically turned off.• DIGA (Panasonic DVD Recorder) will not turn off if it is still in rec mode.Caution: The TV remains on even if the EZ Sync compatible equipment is turned off.SpeakercontrolYou can select Home theater, or TV speakers for audio output.Control theater speakers with the TV’s remote control.This function is available only when Panasonic Amplifier or Player theater is connected.In the EZ Sync menu, you can select an HDMI connected Panasonic equipment and access it quickly. Continueusing your TV’s remote control to operate the equipment, pointing it at the TV.One-touchtheaterplaybackselectaccessYou can select availableitems only.Volume up / downMute■ Home theater: Adjustment for equipment• The sound of TV is muted.• When the equipment is turned off, TV speakersbecome active.• Selecting “Home theater” turns the equipment onautomatically if it is in standby mode.■ TV: The TV speakers are active.selectchangeEZ SyncControlonly withTV’s remotecontrol(for “HDAVIControl 2”)PressSelect the equipment you want to access.Defaultspeakers “TV” is the default setting. To set the Home Theater system as default speakers, change the default speakerssetting from “TV” to “Theater”. Sound will be output from the Home Theater whenever the TV is powered on.Move the cursor/SelectSet/AccessReturn to the previous menuSUBSUBMENUMENU Display the Functions menu on theequipmentAvailable when the purpose of the keysare displayed on screen■ Available TV’s remote control buttonsOperate the equipment with the TV’s remotecontrol, pointing it at the TV.• To operate the equipment, read the manual of theequipment.