Panasonic TC-26LE60 Operating Instructions Manual

Also see for TC-26LX60 - 26" LCD TV: Operating instructions Operating instructions manual Manual de instrucciones Operating instructions Operating instructions manual

Panasonic TC-26LE60 Operating Instructions Manual Manual pdf 40 page image

40Technical InformationClosed Caption (CC)Aspect RatioLet you choose the aspect depending on the format of the received signal and your preference. (p. 11) (e.g.: in caseof 4:3 image)• For viewing Closed Caption of digital broadcasting, set the aspect ratio to FULL.(If viewing with H-FILL, JUST, ZOOM or 4:3, characters will be cut off.)• The closed caption is not displayed when you use HDMI connection.• If analog connected equipment is used for displaying or recording, closed caption (CC) should be set On/Off on theconnected equipment.The CC mode setting of the TV will not affect the analog input.If a digital program is being output in analog format, the CC data will also be output in analog format.If digital connected equipment is used for input, CC should be set On on either the connected equipment or the TV.If CC is set On on both the connected equipment and the TV, captions from each unit will overlap.• FULL • JUSTFULL JUSTEnlarges the 4:3 image horizontally to the screen’s side edges.(Recommended for anamorphic picture)Stretches to justify the 4:3 image to the four corners of thescreen.(Recommended for normal TV broadcast)• H-FILL • 4:3H-FILLEnlarges the 4:3 image horizontally to the screen’s side edges.The side edges of the image are cut off.Standard(Note that “after image” of the side bar may occur fromdisplaying it for a long time.)• ZOOMZOOMEnlarges the 4:3 image to the entire screen.(Recommended for Letter Box)• Zoom adjustVertical image position and size can be adjusted in “ZOOM.”Select “Zoom adjust” on the “Picture” menu. (p. 14-15)V-Position: Vertical position adjustment Size: Vertical size adjustmentSide bar• To reset the aspect ratio (OK)Note• 480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9) : FULL,JUST, 4:3 or ZOOM• 1080i / 720p : FULL, H-FILL, JUST or 4:3• When the signal is 720p/1080i, the aspect modeautomatically defaults to Full after turning off the TV,after changing input mode, or after changed signalresolution other than 720p/1080i.