Panasonic TC-23LX60 Operating Instructions Manual

Also see for TC-23LX60, TC-26LX60C, TC-26LX60L, TC-32LX60C, TC-32LX60L: Operating instructions Operating instructions Operating instructions manual Service manual Manual de instrucciones

Contents

Panasonic TC-23LX60 Operating Instructions Manual Manual pdf 10 page image

18 19AdvancedControl with HDMI “HDAVI Control™”Operating Peripheral EquipmentOther adjustOffStandardAuto power onPower saveCtrl with HDMIOffProg-out stopOnSetupLanguageCCInput labelsOther adjustProgram channelMenuSetupLockAudioPictureOperating Peripheral EquipmentYou can operate other manufacturers’ equipment using this TV’s remote control.Connect the external equipment to the TV andPower Off the external equipmentPress both buttons simultaneouslyfor more than 3 seconds.• Release the buttons when the equipment selectionbuttons start flashing.Select the equipmentwith the equipment selection button• The selected button remains lit (other buttons are notlit).Input the equipment’s 4-digit remotecontrol code (p. 23-24)Operate the equipment with theremote control (p. 22)• The external equipment turns On.■ If the equipment does not operate withremote control• When your equipment has a single codeInput the remote control code again• When your equipment has multiple codesChange the code with above and test again• Registration will fail if the wrong code is input or it takes more than 30 seconds to register.To find a code not listed in the code listThis procedure searches all codes and is called the “sequence method.”CautionAfter step above, change the code andtestWhen the correct code is foundstoreOperate the equipment with theremote control (p. 22)• Repeat until the code is found• It may take many attempts before the correctcode is foundchange41235+Newer Panasonic audio-video products with HDMI output connections can be controlled using the TV’sremote. Limited features such as automatic switching to the TV’s HDMI input are available.• This feature is limited to models incorporating Panasonic’s “Control with HDMI”. Refer to the individual instructionmanuals for compatibility information.• Non-HDMI-compliant cables cannot be utilized.• It is recommended that you use Panasonic’s HDMI cable.Recommended part number: RP-CDHG15 (1.5 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m)[for TC-23LX60, TC-26LX60C and TC-32LX60C only]Display menuSelect “Ctrl with HDMI”Select “Setup”Select “On” or “Off”■ Press to exit or return to previous screenSelect “Other adjust”When “Ctrl with HDMI” is set to “On”, at the start of HDAVI control compatible equipment’s playback,the TV’s input automatically switches to the input corresponding to the playback equipment.• If using DIGA operation, the TV’s input automatically switches to DIGA and the DIGA menuis displayed. If the TV’s power is Off, it is automatically switched On.When “Ctrl with HDMI” is set to “On”, the TV is automatically turned on and switched to theappropriate HDMI input whenever HDAVI control compatible equipment is initially turned onand Play mode is selected.When “Ctrl with HDMI” is set to “On” and the TV is turned off, the connected HDAVI controlcompatible equipment is also automatically turned off.• DIGA (Panasonic DVD Recorder) will not turn off if it is still in rec mode.Power offlinkPower onlinkAutomaticinputswitching• Before using HDMI control functions, the connected equipment must also be set. For details, see the operationmanual for each piece of equipment.• For equipment connection details, see p. 20.• Default setting is “On”. If no HDMI equipment is connected or standard HDMI equipment (non- “Control withHDMI”) is used, set to “Off”. (see below)Note45123selectnextselectnextselectchangeControl with HDMI “HDAVI Control™”• “Control with HDMI” function does not work in countries other than the USA and Canada.• The TV remains on even if the “Control with HDMI” compatible equipment is turned off.Caution