Panasonic TC-22LH30 Operating Instructions Manual

Panasonic TC-22LH30 Operating Instructions Manual Manual pdf 26 page image

26Press to select the code.• The code starts from the current device.• Press POWER button to test the operation.• Repeat the steps until the component code isfound. It may take many attempts before thecorrect code is found.Press to store the code.Operating peripheral equipment using the remote control123 Enter the 3-digit infrared code(see pages 27, 28).• Factory default setting :Panasonic• Press POWER to test theoperation.Press and hold POWER andOK together, for at least 5seconds.• The mode selection buttonsflashes, and then release thePOWER and OK.POWER +1 2 34 5 67 809CHCHVOL VOLO KVCRDVDDBS/CBLTVSelect the type of the component.• The selected button light and allothers go out.Programming the remote control codeYou can operate other manufacturers’ components using this TV’s remote control.Preparations:• Connect the plug of the external component to the wall outlet.• Make sure the component is turned off.Notes:• If the component does not operate with the remote control, repeatthe procedure using another code. (Some brands have multiplecodes).• If an incorrect code is entered, or if the procedure takes longerthan 30 seconds, the programming will fail.To find the code not listed in the indexRETURNEXITMENUPLAYR-TUNESLEEPPROGGUIDERECALL MUTETV/VIDEOSTOPT VPAUSE RECFFREWASPECTTV/VCR VCR/DBS CHSAPCHO KCHVOL VOLPOWERVCRDVDDBS/CBLTV1 2 34 5 67 809After step 2 above,