Panasonic TC-21P50R Operating Instructions Manual

Also see for TC-21P50R: Service manual

Panasonic TC-21P50R Operating Instructions Manual Manual pdf 34 page image

33MAIN menu Operation1. You can change the level of each Function( C O L O U R , N T S C - T I N T, B R I G H T,CONTRAST, SHARPNESS, COLOURTEMP.) for each PICTURE menu.2. PICTURE menu mode will be memorized foreach TV, AV1, AV2 and AV3 mode.Note:Even if the TV is not set to NTSC mode, “NTSC-TINT” will be displayed and level adjustmentwould be possible. But it would not function.By pushing the Normal “N” button on the Remote Control while the PICTURE menu is displayed, the selected menu will be changedto the Normal mode.Normalization will not occur if the menu is not displayed when the “N” button is pushed.The Normal mode is the factory preset condition. Returning to this original condition is called “Normalization”.Helpful Hint ( Normalization)MAIN MENUPICTURE MENUNPicture Menu FunctionDYNAMICSTANDARDSOFTFor viewing in brighter environments.This menu selects a higher than normallevel of Contrast.For viewing in normal (evening lighting)environments.This menu selects the normal levels ofBrightness and Contrast.For viewing in a dark room.This menu selects reduced levels ofBrightness and Contrast.COLOUR TEMP. Left RightItemCOLOURNTSC-TINTBRIGHTCONTRASTSHARPNESSIndicatorEffect32 COLOURLess More32 NTSC-TINT32 BRIGHT63 CONTRAST32 SHARPNESSReddish GreenishDarker BrighterLess MoreLess MoreSTD COOL WARM1. Push the “Main Menu” button.2. Select the PICTURE menu by pushing thePosition Left “<” or Right “>” button andAccess the PICTURE menu by pushingthe Position Down “∨” button.3. Select the DYNAMIC, STANDARD orSOFT by pushing the “Picture Menu”button.4. Choose the option and adjust by pushingthe Position Up “∧” or Down “∨” button,and by setting with the Position Left “<”or Right “>” button.PICTURE menu Operation