- 10 -TC-14RM10LP/ TC-20RM10LP/ TC-20RA10LPCHK2 MODE TABLEStandard values231005028502850RF AGCCONTRASTCOLOURSUB COLOURTINTSUB NTSC-TINTBRIGHTCHK3 MODE TABLEStandard values32374345V-SLOPEV-SHIFTV-AMPH-SHIFTCHK4 MODE TABLEStandard values28305030100113331352R-CUTG-CUTBRIGHTSUB-BRIGHTCONTRASTSUB- CONTRASTR-DRIVEG-DRIVEB-DRIVERGB-CONTRASTCHK2 MODE - VCJ ADJUSTMENTSOn CHK2 mode it is possible to adjust the items of the table shown here.Note:To select an item, type “4” to move forward and “3” to move back.After having selected the desired option, adjust it by pressing the “VOL(_)” or“VOL(+)” keys. The OSD color will change for red.CHK3 MODE - PINCUSHION ADJUSTMENTSOn CHK3 mode it is possible to adjust the items of the table shown here.Note:To select an item, type “4” to move forward and “3” to move back.After having selected the desired option, adjust it by pressing the “VOL(_)” or“VOL(+)” keys. The OSD color will change for red.CHK4 MODE - WHITE BALANCE ADJUSTMENTSOn CHK4 mode it is possible to adjust the items of the table shown here.Note:To select an item, type “4” to move forward and “3” to move back.After having selected the desired option, adjust it by pressing the “VOL(_)” or“VOL(+)” keys. The OSD color will change for red.Observation:The values of the tables CHK2, CHK3 and CHK4 are average values and they can vary, the values described here arereference values.TO EXIT SERVICE MODE AND RETURN TO NORMAL MODETo exit SERVICE MODE, turn off or reset (SELF CHECK) the television.TEST AND MEASUREMENT EQUIPMENTSTo execute all these electrical adjustments, the following equipment are required:• (TV Multi-Channel Sound Modulator (U.S.A.))• Plastic Tip Driver and Non-Metal Driver• Isolation Transformer (Variable)• Degaussing Coil• White Pattern Generator• Audio Generator• Dual-Trace OscilloscopeVoltage Range: 0.001 V to 50 V/Div.Frequency Range: DC to 50 MHzProbes: 10:1, 1:1• NTSC Video Pattern Generator• DVM (Digital Volt Meter)• MTS/SAP Signal GeneratorADJUSTMENTS