Operation GuideTC-14A12P / TC-20B12- 4 -ENGLISHENGLISHENGLISHENGLISHENGLISHLocation of ControlsLocation of ControlsLocation of ControlsLocation of ControlsLocation of ControlsREMOTE CONTROLREMOTE CONTROLREMOTE CONTROLREMOTE CONTROLREMOTE CONTROLR-TUNER-TUNER-TUNER-TUNER-TUNEPOWERPOWERPOWERPOWERPOWERTIMERTIMERTIMERTIMERTIMERWWWWWAKE-UPAKE-UPAKE-UPAKE-UPAKE-UPCHANNELCHANNELCHANNELCHANNELCHANNELKEYBOARDKEYBOARDKEYBOARDKEYBOARDKEYBOARDRECALLRECALLRECALLRECALLRECALLPICTURE NORMPICTURE NORMPICTURE NORMPICTURE NORMPICTURE NORMMUTEMUTEMUTEMUTEMUTETV/VCRTV/VCRTV/VCRTV/VCRTV/VCRCHANNEL SELECTIONCHANNEL SELECTIONCHANNEL SELECTIONCHANNEL SELECTIONCHANNEL SELECTIONVOLUMEVOLUMEVOLUMEVOLUMEVOLUMEMAIN MENU ANDMAIN MENU ANDMAIN MENU ANDMAIN MENU ANDMAIN MENU ANDMENU NAMENU NAMENU NAMENU NAMENU NAVIGAVIGAVIGAVIGAVIGATIONTIONTIONTIONTIONPICTURE MENUPICTURE MENUPICTURE MENUPICTURE MENUPICTURE MENURemote ControlRemote ControlRemote ControlRemote ControlRemote ControlInstalling the BatteriesInstalling the BatteriesInstalling the BatteriesInstalling the BatteriesInstalling the Batteries1. Remove the battery compartment coverfrom the back of the remote control, bypressing the lock down and pulling thecover out.2. Install the batteries in the compartment(polarities (+) and (-) must be correct).3. To replace, fit both cover lugs into thecompartment slots and press the lock toclose.Battery replacement precautionsBattery replacement precautionsBattery replacement precautionsBattery replacement precautionsBattery replacement precautions1. Batteries must be replaced as a pair.2. Do not combine a used battery with anew one.3. Do not mix battery types(example: “zinc carbon” with“alkaline”).4. Do not attempt to charge, short-circuit,disassemble, heat, or burn usedbatteries.5. Remove the batteries if the remotecontrol transmitter will not be usedfor a long period of time.123Two “AA” batteriesNote:Note:Note:Note:Note:Dispose of the batteries in the domestic trash.This remote control transmitter uses two “R6” (AA) batteries.DOMESTICTRASH