Operation GuideTC-14A12P / TC-20B12- 14 -ENGLISHENGLISHENGLISHENGLISHENGLISHHotel ModeHotel ModeHotel ModeHotel ModeHotel ModeThis feature is very useful in hotels or when the owner does not want other people to change setting levels.When activated, only CHANNEL, VOLUME, PICTURE MENU, RECALL, MUTE, TV/AV buttons will operate.Supplementary Remote Control OperationsSupplementary Remote Control OperationsSupplementary Remote Control OperationsSupplementary Remote Control OperationsSupplementary Remote Control OperationsON MUTE (Mute/Closed Caption)ON MUTE (Mute/Closed Caption)ON MUTE (Mute/Closed Caption)ON MUTE (Mute/Closed Caption)ON MUTE (Mute/Closed Caption)This feature will function only when:1. Mode/CC feature is OFF.2. The MUTE button ( ) is pressed on the remote control.Press the navigation button ( / ) to select an option as shown below:LanguageLanguageLanguageLanguageLanguageTo select functions vertically orhorizontally, press the navigationbuttons.÷NONONONONO C1C1C1C1C1 C2C2C2C2C2C4C4C4C4C4 C3C3C3C3C3÷ ÷’ ’÷To activate:::::1. Adjust sound level.2. Press the TIMER button on the remote control andset it to 30 minutes.3. Press and hold the RECALL button.4. Press the CHANNEL ( ) button on the TVpanel.To exit Hotel mode:Press the VOLUME ( ) button on the TV panel and theTIMER button on the remote control simultaneously.ccccccccccIDIOMAPORTUGUÊSESPAÑOLENGLISHIDIOMAPORTUGUÊSESPAÑOLENGLISHLANGUAGEPORTUGUÊSESPAÑOLENGLISHTroubleshooting ChartTroubleshooting ChartTroubleshooting ChartTroubleshooting ChartTroubleshooting ChartBefore you call for service, determine the symptoms and make a few simple checks, as shown below.Snowy picture Noisy soundMultiple image Normal soundInterference Noisy soundNormal picture No soundNo picture No soundNo color Normal soundNo video Low soundColored blotches Normal soundNo color Noisy soundAntenna location and/or connectionSIGNALSSIGNALSSIGNALSSIGNALSSIGNALSPicturePicturePicturePicturePicture SoundSoundSoundSoundSoundCheckCheckCheckCheckCheckAntenna location and/or connectionElectrical appliances,lights, carsand motorcyclesVolume(check if mute control isactivated on the remote control)Check that the AC power cord is plugged intothe AC outlet.Unit has not been turned ON.Brightness/contrast and audio control settings(Check by pressing the power switch.)Color control settingsPerform channel tuning procedure again.Unit was relocated while it was ON.Improper color system