Panasonic Switch-M8eGi Series Installation Manual

Also see for Switch-M8eGi Series: Operation manual Product specification Operation manual

Contents

Panasonic Switch-M8eGi Series Installation Manual Manual pdf 3 page image

3This chapter contains important safety instructions for preventing bodilyinjury and/or property damage. You are required to follow them.This symbol indicates a potential hazardthat could result in serious injury or death. Severity of bodily injury and/or property damage, which could result from incorrectuse of the Switching Hub, are explained below. The following symbols are used to classify and describe the type of instructions tobe observed.Important Safety InstructionsWARNINGCAUTION This symbol indicates safety instructions.Deviation from these instructions could leadto bodily injury and/or property damage.This symbol is used to alertusers to what they must do.This symbol is used to alertusers to what they must not do.WARNING Do not use power supply other than AC 100 - 240 V.Deviation could lead to fire, electric shock, and/or equipment failure. Do not handle this Switching Hub and connection cables during athunderstorm.Deviation could lead to electric shock. Do not disassemble and/or modify this Switching Hub.Deviation could lead to fire, electric shock, and/or equipment failure. Do not damage the power cord. Do not bend too tightly, stretch, twist, bundlewith other cord, pinch, put under a heavy object and/or heat it.Damaged power cord could lead to fire, and/or electric shock. Do not handle the power cord with wet hand.Deviation could lead to electric shock, and/or equipment failure. Do not insert, nor drop foreign objects such as metal or combustible things intothe inside from the openings or twisted pair ports.Deviation could lead to fire, electric shock, and/or equipment failure. Do not store or use the Switching Hub in places where it might get splashedwith liquids such as water, in places with a lot of humidity, in places withconductive dust, or in places where there are corrosive and combustible gases.Deviation could lead to fire, electrical shock, and/or equipment failure. Do not place this Switching Hub under direct sunlight and/or hightemperature.Deviation could lead to high internal temperature and fire. Do not install this Switching Hub at the location with continuous vibration orstrong shock, or at the unstable location.Deviation could lead to falling, injury and/or equipment failure.