Panasonic Switch-M48eG Operation Manual

Also see for PN28480K-ID: Operation manual Operation manual Installation guide

Contents

Panasonic Switch-M48eG Operation Manual Manual pdf 11 page image

111. Product OutlineSwitch-M48eG is an all Giga bit Ethernet Switching Hub with managementfunction having 44 ports of 10/100/1000BASE-T and four pairs of10/100/1000BASE-T port and SFP extension slot, one of which is selectable.1.1. Features Has wire-speed Layer 2 switching function. Ports 1 to 44 are 10/100/1000BASE-T ports corresponding to autonegotiation. Also their speed and communication mode can be switchedby configuration. Ports 45 to 48 can be used as a 10/100/1000BASE-Tport corresponding to auto negotiation or an SFP extension slotexclusively. Also their speed and communication mode can be switchedby configuration. All twisted pair ports support straight/cross cable auto sensing function.Simply connect devices with straight cables, whether it is a terminal or anetwork device.(This function does not work if the port communication configuration isset at Fixed or Link Aggregation. Ports 1 to 44 are set at MDI-X. (default)) Has a loop detection function, which notifies when a loop occurs withthe corresponding port LED and automatically shuts down the loopedport. Has a loop detection history function, which notifies when a loop occurswith the corresponding LED and enables a network administrator toidentify the looped port after the loop is removed. VLAN function allows free grouping of up to 256 VLANs Fanless design solves noise problem or fan failure. Use of LED indicator switching button saves power consumption of LEDlamps. The IEEE802.1p compatible QoS function is supported. Has an Internet mansion function, which ensures security between eachdoor. Power saving mode detects the connection status automatically andsaves power consumption to minimum.