Panasonic Strada CN-NVD905U Operating Instructions Manual

Also see for CN-NVD905U - Strada - Navigation System: Upgrade guide Installation instructions Quick reference guidebook Installation instructions Quick reference guide

Contents

 If the unit fails to operate IMPORTANTPush the switch only when the unit fails to operatewith any buttons. (Stored settings and adjustmentsare cleared.) If the unit fails to return to normal,contact the nearest Panasonic Servicenter and have itrepaired.Note: If the ID code has been already set, you will be askedto enter the ID code right after the unit is restarted. A noise may occur when the reset switch is pressed,but that does not indicate a malfunction.Error display messagesDisplay Possible cause  Possible solutionHardware error.Reboot or press resetswitch. There was a malfunction in the amp. Press the reset switch on the system. ( follows)Read error  Some mechanical or operation error has occurred. If there is no response to pressing the eject button, restart the engine.Cannot play this disc The inserted CD/DVD cannot be read. Refer to “Discs that can be played back” ( page 7) and use the right kind ofdisc. Some mechanical or operation error has occurred. If there is no response to pressing the eject button, restart the engine.Product servicingIf the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorizedPanasonic Servicenter. The product should be serviced only by a qualified technician.Replacing the FuseUse fuses of the same specified rating (15 A). Using different substitutes or fuses with higher rating, or connectingthe product directly without a fuse, could cause fire or damage to this unit.If the replacement of the fuse fails, contact your nearest Panasonic Servicenter for service.Reset the systemReset switchInsert a hard, slender stick into the hole and push theswitch.English105105