Listening to the RadioStoring stations into the channelsYou can tune directly to a station in Free Mode by finding the station’sfrequency, or you can store stations in Memory Mode to make tuningsimpler.14266532415VOLRelease HOLD.PressPress to choose the modes.Press to change the band.Each time you press the button;FM (----. AMPress to select the station.≥Press for a moment to change rapidly.≥“TUNED” appears when tuned.Adjust the volume.∫ To turn off the radio∫Press [∫ OPR OFF] (main unit) or press and hold [RADIO] (remotecontrol).15324Release HOLD.Press to changethe band.Each time you pressthe button;FM (----. AMPress to set toMemory Mode.5 Store stations into the channels of your choice.1Press [MEMORY/RECALL].Do each of the following within 10 seconds.2Press [j :, 9 i] to select the frequency.1≥Press [j :, 9 i] for a moment to change rapidly.3Press [MEMORY/RECALL].4Press [j :, 9 i] to select the memory number .1≥Press [j :, 9 i] for a moment to change rapidly.5Press [MEMORY/RECALL] to confirm the setting.Store the frequencies of up to 30 stations; 20 FM and 10 AM. ∫ To erase unnecessary stationsPreparation: Press [TUNING MODE] to set to Memory Mode.1 Press [j :, 9 i] to select the memory number to beerased.2 Press [MEMORY/RECALL].The frequency number flashes.Do each of the following within 10 seconds.3 Press and hold [MEMORY/RECALL] until “- - - -” flashes.4 Press [MEMORY/RECALL] to erase the memory number.The next memory number appears.Memory numberFree Mode Memory Mode7Press.FM107 10FM107 101 MMFM1 98 00MFM1 98 00Memory numberReferences to the remote control apply only for China.3 only on the main unitFM107 101 MMemory number(➪ Storing station intothe channels)For China