Using the Unit with Optional AccessoriesUsing the unit with an audiosystemUsing stereo connection cable (not included), you canhear CDs on your audio system.≥Connect the cable to the amplifier after turning off itspower.≥Do not connect the cable to the PHONO jacks on theamplifier.≥Obtain the optional connecting cable if the amplifiercomes with mini-phone jacks.≥Adjust the volume on the amplifier.≥Keep the unit’s VOLUME control at a setting between4 and 6.Using the unit with a car audiosystemItems to be purchasedFor connection to the car audio system and thepower supply:≥Car stereo cassette adaptor (SH-CDM10A)≥Car adaptor (SH-CDC9)Note!It may not be possible to use the unit with some types ofcar stereos owing to restrictions imposed by the con-struction of the car stereo cassette adaptor.For further details, refer to the instructions of the partconcerned.LRConnect the car stereo cassette adaptorto the unit’s headphone jack.(When doing this, keep the unit’s VOLUMEcontrol at a setting between 4 and 6.)The anti shock function works by reading audio dataand storing it in memory (up to 10 seconds worth). Theunit then fills in interruptions caused by bumps and vi-brations with data from the memory. This unit also in-corporates a powerful anti-shock mechanism thatprevents skipping caused when play speed is changedby swinging of the unit.Press during play or stop mode.The following indicator appears on the display.Note!If you have pressed [A.SHOCK] when the unit is in stopmode, press [1 ;] to start play.When bumps continue repeatedlyThe following indicator appears on the display andsound is interrupted.To cancel the anti-shock functionPress [A.SHOCK] again.Note!≥The anti-shock setting can be changed during play,but this may cause a slight interruption in the soundbecause the disc’s rotation speed changes.≥During anti-shock operation, the disc rotates at a high-er rate than usual to collect extra audio data. Thiscould result in a slight increase in disc rotation noise.Listening to sound with the unit con-nected to an audio systemThe anti-shock function uses digital signal compressiontechnology. It is recommended that the anti-shock func-tion be canceled if the unit is connected to a homeaudio system.Anti-Shock Function5If you ship the productCarefully pack and send it prepaid, adequately insured and preferably in the original carton.Attach a postage-affixed letter, detailing the complaint, to the outside of the carton.Do NOT send the product to the Executive or Regional Sales offices. They are NOT equipped to make repairs.ModelNo.SerialNo.orCodeNo.DateofPurchaseDealer’sNameDealer’sAddressCustomer’s RecordI A.SHOCKB A.SHOCKBHeadphone jack (Ë)Amplifier(White)(Red)Stereo connection cable (not included)To CD or AUXterminalsRQT5366ONLY FOR U.S.A.