Panasonic SL-PR300 Operating Instructions Manual

Also see for SLPR300 - CD RECORDER: Operating instructions Service manual

Contents

Panasonic SL-PR300 Operating Instructions Manual Manual pdf 16 page image

16RQT6091Listening to CDsTo stop CDR playback temporarily• Pressing the CDR Control PAUSE S button at any time when aCD is playing in the CDR pauses playback. Press the CDR Con-trol PLAY p button to resume playback.• When playback is paused, the S indicator is shown in the dis-play window.Removing a CD from the CDR• To remove a CD from the CDR, press the CDR OPEN/CLOSE 0 button. To remove a CD when it is being playedback, it is recommended that playback first be ended by press-ing the CDR Control STOP s button before pressing theOPEN/CLOSE 0 button. After pressing the OPEN/CLOSE 0button, the tray will open and the CD can be removed. Press theOPEN/CLOSE 0 button once more to close the tray.Notes• When an unfinalized CD-R or CD-RW is loaded in the CDRand the CDR OPEN/CLOSE 0 button is pressed to open theCDR disc tray, “FINALIZE?” is shown in the information dis-play. If you do not wish to finalize the CD at that time, press theCDR OPEN/CLOSE 0 button again. For more information onfinalizing a CD, see page 38.• If playback of an unfinalized disc is stopped or if tracks areskipped (forward or reverse), some data of the track (or begin-ning of next track in the case of skipping) may be cut (not read)when playback starts again.• The total track time does not always match total playback time(time shown in the information display) exactly because theplayback time includes lead-in and lead-out spaces as well.1 Press the CD or CDR button to select the deck.CD button: To control discs in the 3-CD changerCDR button: To control the disc in the CDR• Pressing the CD1, CD2 or CD3 button automatically sets theunit to the 3-CD changer and starts playback of the disc in theselected tray.• When the CD function is selected, the CD PLAYER indicator isshown in the display window. When the CDR function isselected, the CD RECORDER indicator is shown.2 Press the command button of the operation youwant to perform.• The buttons on the remote control perform the same operationsas the corresponding buttons on the main unit.• The command is applied to the 3-CD changer or CDR depend-ing on the function currently selected.Using the Remote Control toControl PlaybackCD1 CD2 CD3CD RECPLAYMODE•RECREC MUTERECSELECTORMENUPITCH0CANCELREPEAT CDPITCH +SETPITCH–COMPACT DISC RECORDERRAK-PR300CD-R/RWCD EDIT FINALIZE DISPLAY1 24 57 83690 10FADE SYNCHRODISC SELECTOR_>CONTROL12CD1, CD2, CD3SL-PR300EB.fm Page 16 Thursday, September 20, 2001 3:42 PM