Panasonic SL-MP75 Operating Instructions Manual

Contents

Panasonic SL-MP75 Operating Instructions Manual Manual pdf 6 page image

You can regenerate signal frequency lost during compression, restoringto near pre-compression form.While stopped, each time you press and hold [$MEMO/%DISP]MP3This unit can play MP3, a method of compressing audio without overtly hurting audio quality.∫When creating MP3 files to play on this unitDisc formats: ISO9660 level 1 and level 2 (except for extended formats)∫Limitations on MP3≥Only artist name and track name ID3 tags (version 1.0 and 1.1) are displayed.≥This unit is compatible with multi-session but if there are a lot of sessions it takes more timefor play to start. Keep the number of sessions to a minimum to avoid this.≥This unit cannot play files recorded using packet write.≥If a CD-ROM format CD contains MP3 and files other than MP3, only the MP3 files will beplayable.≥Depending on how you create MP3 files, they may not play in the order you numbered themor may not play at all.ALBUMThis system reduces skipping caused by vibration to a minimum.You can change the anti-skip memory time for CD-DA to improve sound quality.While stopped, each time you press and hold [$MEMO/%DISP]≥ You cannot change the memory time for MP3. It is a maximum of 100 secondsfor MP3 recorded at 128 kbps.RND RND A B--01A003T001MA003–T010--0131432MPlaying MP3Starting play from an album (Album skip)Press and hold [:] or [9] until the album you want appears.Number of tracksPlaying only the tracks in a selected album (Album mode)Each time you press and hold [MODE]No display(canceled)≥ You can select another album with album skip.≥ You cannot turn album mode on during program play.Changing the displayEach time you press and hold [$MEMO/%DISP] during playAlbumtitleTracktitleID3artist nameAlbum number,track number andelapsed play time≥ The unit displays up to 27 characters for a track title, 30 for an album title, ID3 artistname and ID3 track title.≥ “_” is displayed in place of characters this unit cannot display.≥ “AlbumTitle”, “TrackTitle” and “ArtistName” appear on the top line when showingalbum titles, track titles and artist names.≥ “TAG” appears when displaying ID3 tags. “ ” appears instead if ID3 tagshaven’t been entered.Other Play MethodsProgram Play Play modesTrack number Sequence numberWhile stopped, press [:] or [9] toselect the track.You can skip albumswhen programmingMP3 tracks(➪ below).Press [$MEMO/%DISP] to register.Press [1/;] to start play.Repeat steps 1 and 2 to registerup to 20 tracks.∫To cancel the program play∫Press [∫].∫To confirm the contents ofthe program∫Press [$MEMO/%DISP] whilethe disc is playing.Changing the sound qualityWhen Playing MP3Sequence numberAlbum number Track numberEach time you press [EQ]Booststhe bassEnhancedS-XBSConcert hall-like soundEach time you press [MODE]One trackrepeat All trackrepeat Random RandomrepeatNo display (canceled)≥ The effect may differ between different kinds of music.Anti-Skip SystemID3track titleAlbum modeRQT72146No display (canceled)orWhile pausedDuring playAB repeat (AB specifiedsegment repeat) (➪below)Enjoying even more natural sound (Digital Re-master)Soundenhanced Conservesbattery lifeAnti-skip enhanced mode,45-second anti-skip memorySound enhanced mode,10-second anti-skip memoryAlbum number001track. mp3002track. mp3003track. MP3001albumCD-ROM drive1001track.mp3Up to 27 characters for a track title, 30 for an albumtitle, ID3 artist name and ID3 track titlePrefix with 3-digit numbers in the order you want to playNaming tracks and albumsExtension(or .MP3)002album004track.mp3005track.mp32004album008track.MP3009track.MP3003album006track.mp3007track.MP343If you created an album such as 004album on theleft, the files may not play in name order.The albums would play in the order 1, 2, 3, 4.No display(canceled)≥ You cannot select “RND” and “A`B” while playing MP3.∫Specifying the AB segmentPress [$MEMO/%DISP] at the start point (A) and once more at the end point (B).≥ Stop or skip (➪ page 5) to cancel.≥ If you do not specify point B and reach the end of disc, point B is setautomatically and repeat begins. You can also specify point B again bypressing [$MEMO/%DISP].

/ 6

Related manuals for Panasonic MP75 - SL CD / MP3 Player